bearing surface
英 [ˈbeərɪŋ ˈsɜːfɪs]
美 [ˈberɪŋ ˈsɜːrfɪs]
[机] 支承面；支撑面；轴承面
双语例句
- The journal rubs against the bearing surface.
轴颈在轴承面上摩擦。 - The production of an image by applying an ink bearing surface to paper.
加油墨于承印纸的表面以产生影象的一种技术。 - In addition, no transition arc was machined from the bearing surface of the bolt forehead to the neck scapular root of the screw rod, which leds to the bolt fracture failure also.
另外，螺栓加工头部支承面到螺杆颈部的肩胛根部没有过渡圆弧，也是螺栓断裂失效的一个原因。 - Graphite filling offers the best bearing surface when using a hard chrome plated piston rod.
石墨填充提供了最好的支承面时使用硬镀铬活塞杆。 - The Gas Film Lubrication Characteristic Analysis with the Variation of Magnetic Head Bearing Surface Recess
磁头承载面结构层深度对气膜润滑性能的影响 - The maximum permitted degree of humidity of the bearing surface;
支承面的最大允许湿度； - The journal rubs against the bearing surface. cross-section views of the neck.
轴颈在轴承面上摩擦。对颈状物的剖面观察。 - A novel grass planting brick mainly comprises an upper brick surface, a bearing surface on the bottom part, an earth storage surface on the waist part, a grass planting hole and drainage holes.
一种新型植草砖，它主要包括上砖面、底部承重面、腰部储土面、植草孔、排水孔。 - The material offers an excellent bearing surface with hard chrome plated piston rod.
提供的材料镀硬铬活塞杆表面良好的关系。 - Inspection on Bearing Surface Defect Based on Computer Vision
基于计算机视觉的轴承表面缺陷检测 - A removable close grain, graphite-filled, cast iron bushing offers the best bearing surface for the hard chrome plated piston rod.
一个可移动的密切粮食，石墨填充，铸铁套管提供的硬镀铬活塞杆最优秀的轴承表面。 - "D" type bearings with the lubrication mechanism of polymer, make the bearing surface, and return to the pump inlet side, in order to ensure the effective axis.
“D”型轴承结合了强制润滑机理，使聚合物经轴承表面，并返回到泵的进口侧，以确保旋转轴的有效润滑。 - Air under the slider forms Air Bearing Surface or ABS.
滑块下表面的空气形成空气轴承或ABS。 - Experimental results show that the damage on bearing surface has non-contact and contact pattern.
结果显示，轴承表面形成电蚀损伤分为非接触型放电电蚀和接触型放电电蚀。 - Tolerances, gaps, surfaces, installation chamfers, length of bearing surface, length of stroke, frequency, speed, etc.
公差，间隙，表面，安装倒角，表面承受的长度，行程的长度，频率，速度等等。 - Spacer ring provides bearing surface and prevents deformation of the gasket.
隔离环提供支撑面，防止垫圈的变形。 - The high-speed roller bit bearing surface strengthening technology
高速牙轮钻头轴承表面强化技术实验研究 - The strain history and damage evolvement of bearing material acted by jet impact load can be calculated efficiently using the proposed method, which developes a new method of analyzing cavitation erosion failure of bearing surface.
采用本方法可以有效计算轴瓦材料受微射流冲击载荷作用时的应变过程和损伤演变，由此提出了一种分析轴瓦表面气蚀磨损的损伤力学方法。 - An in depth analysis is made on metallographic structure of welding cracks on bearing surface of adapter. The influences of interior defects and soldering process on welding cracks are analyzed. The solutions in terms of technology and management to prevent cracks are hereupon put forward.
剖析了承载鞍支承面焊补裂纹处的金相组织，分析了内部缺陷、补焊工艺对焊接裂纹的影响，提出了在技术上及管理上防止裂纹产生的措施。 - Based on the harmonic and noise experiment, the model of the rolling bearing surface harmonic distribution is established, the harmonic distribution parameters of affecting the sound pressure level of the rolling bearing noise are investigated, and the harmonic control line equations of controlling noise are presented.
以谐波和噪声实验为基础，经过数理统计分析，建立轴承滚动表面谐波分布模型，研究谐波分布参数对轴承噪声声压级的影响规律，得出控制噪声的最优谐波控制线方程。 - The cavitation damage model was built using finite element analysis software MSC. Marc. This paper attempted to numerically analyze the action process based on damage mechanics when jet created by bubble collapse acted on the bearing surface in the process of cavitation erosion.
Marc大型非线性有限元分析软件建立了轴瓦气蚀损伤模型，基于损伤力学理论对气蚀发生过程中气泡溃灭产生的微射流对轴瓦表面材料的力学作用过程进行了数值分析。 - Influence of antifriction on the bearing surface on the mechanical properties of LWA concrete specimens was studied.
对比研究了试验过程中试件两端减摩与否对轻骨料混凝土力学性能的影响。 - An accurate fault diagnosis method of rolling bearing based on wavelet packet decomposition and signal reconstruction techniques is presented by analysing the characteristics of fault signals, such as rolling bearing surface damage.
通过分析滚动轴承表面损伤类故障信号的特点，提出了基于小波包分解和信号重构技术的滚动轴承故障精密诊断方法。 - Research on the Effect of Deformation of Bearing Surface on Lubrication Performance of Misaligned Journal Bearing
轴承表面弹性变形对倾斜轴颈轴承润滑性能的影响 - The strength design of pins are described in the aspects of their bending stress, contacting compression stress of the bearing surface, and shear stress. Also, the process design and lubrication design for machining, welding and assembly are presented.
本文从销轴的弯曲应力、支承面接触压应力和剪应力计算三个方面介绍了销轴的强度设计，并介绍了销轴的加工、焊接、装配工艺设计和润滑设计。 - In this paper analysis are made of the cause for scoring ocurrence on the connecting rod bolt bearing surface of Model 180 diesel engine and the effect of scoring on tightening force and improvement as well as tightening method appropriate to connecting rod bolts of 180 engines are presented.
本文分析了180柴油机连杆螺钉支承平面引起咬毛的原因及咬毛后对预紧力的影响，提出了改进措施和适合180柴油机连杆螺钉的拧紧方法。 - A bearing surface transmits the interaction between an arch dam and its foundation, the strength of which directly affects the constraint of the bedrock to the dam, and thus affects the stress and deformation of the dam.
建基面是传递拱坝和基岩相互作用的纽带，它的强度直接影响基岩对坝体的约束，从而影响坝体的应力和变形。 - Many properties, such as friction coefficient, load support capacity, lubricant flow, load support angle, etc, can be changed and optimized by changing the slippage property of the bearing surface.
通过改变轴套表面的滑移特性可以改变和优化轴承的各种性能，例如摩擦系数、承载力、润滑剂流量、承载角等。 - Influence of the Strength of Bearing Surface on Stress and Deformation of Arch Dams
建基面强度对拱坝应力、变形的影响 - The finite element model after meshing into FLUENT software, the model established numerical analysis, capacity analysis and lubrication properties, while the lubricating properties of sine wave contrast slope tile bearing surface of the bearing.
将网格划分后的有限元模型导入到FLUENT软件中，对所建立的模型进行数值分析，进行承载力和润滑特性的分析，同时对比斜面轴承的波形波形曲面瓦轴承的润滑特性。